overview

NEW Aqueous 10Lt Hot Water Heater - 240 Volt AC Electric ONLY (Aqueous 10L)

Suit Boats, Caravans, Motorhomes, RV's, Food Trucks, Horse Showers

Variable thermostat 30-75°C on 230V AC

  ** $20 FLAT RATE SHIPPING To Most Areas in Australia **

Australia Wide Shipping To Most Areas in Queensland, Tasmania, Victoria, NT, NSW and South Australia

Mount this way up always

Aqueous rapid hot water systems are suitable for anyone with electric water heating who has ever worried about the amount of water and time wasted while running taps to draw hot water from typical large heating and storage cylinders.

The ruggedly constructed Aqueous systems eliminate delay because they position water heating right next to the point of use. Even if turned off for a while (such as at a holiday home or when families travel) they take only a few minutes to have hot water on tap when people return.

The Australian designed and approved Aqueous offers selectable temperatures between 30-75ºC on 240v so that you can shower, wash, cook, clean and enjoy abundant hot water. Whether visiting the Outback, adventuring on one of Australia's many waterways, or traveling for business or pleasure, this unique product will provide sufficient hot water for you and another to shower in comfort.

Suitable For: Boat, Caravan, RV, Horse Float, Food Van, Under Sink.

Specifications:

• Compact size: 409mm W x 269mm D x 267mm H
• Rated Capacity: 10L
• Rated Voltage: 240v (4.2A, 1000W)
• Warranty: 12 months

Features:

• Variable thermostat 30-75°C on 240v
• Durable outer case with service and inspection points
• SPCC steel & enamel tank
• Single weld line
• Polyurethane insulation
• Automatic voltage detection switching from 12v to 240v and vice versa
• Over temperature and run dry protection
• Combination pressure relief valve and non return valve
• Incoloy 840 heating element
• Wall mount or floor mount

Safety Messages:

Under normal operating conditions:

• The water temperature from the outlet pipe will not exceed 100°C.
• When water reaches the pressure relief valve the water temperature will not exceed 93°C.
• When the water temperature reaches 100°C the input energy would not exceed the energy released.

The knob can only adjust the temperature to a maximum of 75°C, when the temperature reaches 75°C the power cycles automatically.The heater will also power off when the thermos-limiter reaches 93°C. If both the knob and the thermos-limiter have failed and the temperature reaches 99°C, the T&P valve will drain away the water.

NB: The red light will turn on when the supply voltage is 240V AC / 1000W. In these conditions the water heater will take 45 minutes to heat the water from 15°C to 75°C and the light will turn off once the temperature on the temperature knob is reached.

Options:

• EZY RV Exterior Shower Outlet - Large Shower Head with Lock-Off Trigger and Mixer Tap - Suits RV or Boats (Ezy RV)

• Topargee H2F-BT12 Bluetooth Water Tank Gauge - Battery Operated - In Line Flow Meter (H2F-BT12)
• Aqueous 10L 240V AC
• Aqueous 6L 12V DC
• Duoetto 10L Dual Voltage 12V DC/240V AC
• Combo Duoetto Water Heater (10L 12V/240V) + Pressure Pump (12.5L 12V)
  • Rated Voltage 12 Volts 25 Amps, 240 Volts 4.6 Amps
  • Duoetto Water Heater (10L 12v/240v)
  • Fresh Water Automatic Pressure Pump (12.5L 12v)

Options:

• Enerdrive Waterproof Resettable Circuit Breaker - 50 Amp Surface Mount (EN-RCB50)
• Topargee H2F-FM Digital Water Tank Gauge 12V - Flush Mount - Displays Litres Left in Your Water Tank - Nothing Fitted to Your Tank - In Line Flow Meter (H2F-FM)
• Jabsco Compact Accumulator Tank - 0.6L Pressurized Tank 30573-0003 (J21-103)
• Jabsco Accumulator Tank - 1 Litre Pressurised Tank 30573-0000 (J21-101)
• Jabsco Par-Max 1 PLUS - 12 Volt - 3.8LPM - 35PSI - Automatic Freshwater Pressure Pump - Low Flow - 42630-2992 (J20-094)
• FLOJET Freshwater Pressure Pump - 12 Volt - 11LPM - 50PSI - Suits Caravan, Campers and RV's - 3526 Series (FJ100)

Downloads:

• Duoetto MkII Installation Manual (Jan 2021)

specification

Water  Maintenance: If you have brown coloured water that you think looks like rust  coming from your hot water outlet when you turn on the tap first thing in the morning then you have a problem with hard water or Calcium deposits, one of the leading causes of water heater malfunction is Calcium buildup around the heating element  it begins disrupting the heating process by stifling the heating elements With their heat conveyors caked in calcium, the water heaters must work extra hard to produce hot water. As a result, the water in your heater also takes longer to heat up. The hotter the water is, the more calcium and magnesium comes out of your hot water and forms solid deposits on the elements in your hot water heater

Flushing: To treat this you will need to drain your system of water and fill the heater with vinegar and let it sit for about six hours. This will clean any existing mineral build up from your system. To prevent this from reoccurring we recommend a water softening system. If left untreated this can cause heating element failure. Vinegar is a weak acid that is generally quite safe to use.