overview

Isotherm Thermostat for Basic and Slim Water Heaters (SEA00041LA)

Isotemp Water heater thermostat for Basic and Slim B. Basic and Slim waterheaters have stainless steel outer shell.

Manufacturer Part #SEA00041LA

Replacing / re-setting thermostat:

Warning: Be sure to turn power off first!

The thermostat equipment has an integrated working thermostat and a double overheat protection thermostat. This is manually re-settable, by pushing the pin on the top of the thermostat (See fig. 10).

Also check why the  overheat thermostat initially tripped before re-connecting the power supply.

Reset Thermostat:

• Turn off the power!
• Pull out the cable plug.
• Take off the front plastic cover (Basic and Slim 4 screws, Square 3 screws).
• Reset overheat thermostat.

Replacing thermostats:

• Pull off the cable shoes after having noticed their positions. 
• Thermostat sensor ends are put into a tube on the heater element fastening flange.
• Pull them out.
• Unscrew fastening screws for the thermostats.
• Mount new thermostats in opposite order.
• Be sure sensor ends are properly put into the tube.

Downloads:

• Isotemp Basic Spare Parts - Suit Basic 24, 30, 40, 50 and 75
• Isotherm Basic/Slim Spare Parts

specification

Always unplug the heater and/or turn off all circuit breakers and disconnect shore power connections before removing the connection cover . The electrical circuit is controlled by a service thermostat set to 75°C / 167°F and a double overheat  protector that is set to 96°C / 205°F. If the overheat protector trip, it has to be manually reset.

This is done by pressing the small knob on top of the overheat protector.