New generation EuroLED^® recess mount lamps combine single LED technology with precision optics for impressive light output and energy efficiency.

Consuming 4W, each lamp is a completely sealed unit ensuring an ultra long service life in interior or exterior installations. Multivolt^TM circuitry provides consistent illumination and protection across 9-33V DC, even under severe voltage fluctuations and low battery voltages. 

Proven Hella marine touch switching technology makes lighting control beautifully simple. Touch the red pad for red light, the white pad for white light. Hold your finger on the pad for more than two seconds and the lamp will cycle through increasing / decreasing intensity levels until the maximum / minimum intensity is achieved. Release your finger on the light level required. Power consumption is a low 4W on neutral white or warm white (0.33A @12V) and less than 1.5W on red (less than 0.125A@12V). This provides significant energy savings on board, yet each device offers an effective intensity and widespread of effective  illumination and comfortable colour temperatures.

Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.

Dual colour EuroLED® lamps can be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronise the lamps to the same dimming level.

Options:

	9-33V DC White Plastic Rim	2JA 980 631-601
	9-33V DC Polished Stainless Steel Rim	2JA 980 631-611