Muir Prices
Refrigeration
B-TECH LITHIUM PACKAGES
Hella Navigation Lights
Battery
Rule Pumps
Lonestar
ICOM
AV
Muir Winches
Smart TV
Hot Water Heaters
Plastimo Compass
Solar
Lighting
Pumps
Clarion
Jabsco Pumps
Topargee
TV
Battery Chargers
Electrical
Bennett
BBQ
B-Tec Lithium
Majestic
BBQ_2
Isotemp Hot Water System
Aus Wide Shipping

TRUDESIGN 13mm Tail Straight Long Thread - Quality Glass Reinforced Nylon Composite - High Tensile and Impact Strength - Free from Corrosion and Electrolysis - 90246 (138671)

TRUDESIGN 13mm Tail Straight Long Thread - Quality Glass Reinforced Nylon Composite - High Tensile and Impact Strength - Free from Corrosion and Electrolysis - 90246 (138671)

TRUDESIGN 13mm Tail Straight Long Thread - 1/2" BSP fitting
  • Online Price: $8.00 (including 10 % GST tax)


- OR -

Australia's Best Price on TRUDESIGN 13mm Tail Straight Long Thread - 1/2" BSB - 90246 (138671)

Quality Glass Reinforced Nylon Composite - High Tensile and Impact Strength - Free from Corrosion and Electrolysis

Chemical resistant - Unaffected by diesel, petrol, or chemicals

overview

TRUDESIGN 13mm Tail Straight Long Thread  - 1/2" BSP fitting - 90246 (138671)

High Tensile and Impact Strength - Free from Corrosion and Electrolysis

Ability to retrofit to existing TruDesign assemblies

Designed and made in New Zealand for use in marine applications above and below the water line, TruDesign Load Bearing Collars are designed for use with TruDesign Skin Fittings and Ball Valves.
With the Collar in place, the Skin Fitting-Ball Valve-Hose Tail assembly will withstand a 500 lb (227 kg) static force applied to the Hose Tail end of the assembly, for a minimum of 30 seconds – complying with North American ABYC H-27 standards.

Note: TruDesign 2" Skin Fittings meet the requirements of H-27 as standard (i.e. without a Large Collar installed). Adding a Large Collar to assemblies of this size increases the overall strength and protects the vulnerable exposed section of thread on the Skin Fitting.

Glass reinforced nylon composite construction

  • Light weight and high strength
  • Corrosion resistance
    • Long life
    • Minimal maintenance
    • No corrosion deposits to remove
  • Electrically non conductive
    • No electrical bonding
    • Suitable for use on all hull types - aluminium, steel, wood or FRP hulls
  • UV resistant
    • Will not break down in the sun
  • Chemical resistant
    • Impervious to diesel, petrol, oil and antifouling paints
  • Large operating temperature range
    • -40° to 80°C (-40° to 176°F)

PTFE enhanced sealing and sliding elements

  • Reduced friction for easy operation
  • Reduction in blockages due to fouling

High quality

  • Quality materials from accredited suppliers
  • Standards approved through IMCI to ISO standard 9093-2
  • Every Ball Valve is leak tested during manufacture

Standards:

Tru-Design Ball Valves are certified by the International Marine Certification Institute (IMCI) to meet;

  • ISO 9093-2 Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic

In meeting ISO 9093-2, our Ball Valves have been tested with a 155kg load hanging off a hose fitting while connected to our Skin Fitting.

The locking feature allows the Ball Valve to comply with US Coast Guard Regulation 33 CFR 159.7 and ISO Standard 8099 for locking of toilet waste outlets.

Options:

Downloads:

specification