Muir Prices
Refrigeration
B-TECH LITHIUM PACKAGES
Hella Navigation Lights
Battery
Rule Pumps
Lonestar
ICOM
AV
Muir Winches
Smart TV
Hot Water Heaters
Plastimo Compass
Solar
Lighting
Pumps
Clarion
Jabsco Pumps
Topargee
TV
Battery Chargers
Electrical
Bennett
BBQ
B-Tec Lithium
Majestic
BBQ_2
Isotemp Hot Water System
Aus Wide Shipping

Rule 1500 GPH - 12 Volt 4.8 Amp - Submersible Bilge Pump - Suits 28mm Hose (RWB16)

  • Rule
    • Rule 1500 GPH - 12 Volt 4.8 Amp - Submersible Bilge Pump - Suits 28mm Hose (RWB16)

    Rule 1500 GPH - 12 Volt 4.8 Amp - Submersible Bilge Pump - Suits 28mm Hose (RWB16)

    Rule 1500 GPH - 12 Volt 4.8 Amp - Submersible Bilge Pump - 94LPM (RWB16)
    • Online Price: $252.00 (including 10 % GST tax)


    - OR -

    Australia's Best Price on Rule 1500 GPH - 12 Volt 4.8 Amp - Submersible Bilge Pump - 94LPM - Suits 28mm Hose (RWB16)

    We ship Australia wide - ask us for a quote!

    overview

    Rule 1500 GPH - 12 Volt 4.8 Amp 

    Submersible Bilge Pump - 94LPM - Suits 28mm Hose (RWB16)

    We ship Australia wide - ask us for a quote!

    Rule electric submersible bilge pumps, float switches and accessories are manufactured to the highest standards. Rule are world leaders and the innovators in bilge pump design and construction and have won many industry innovation awards. Rule pumps have set the standard for the industry for many years and are the first choice of pleasure boat owners, boat manufacturers and commercial fishermen throughout the world. Rule manufacture bilge pumps to suit boats of all sizes from small runabouts to large yachts and cruisers. They are available in automatic or non-automatic versions. Capacities listed on the following pages are US gallons per hour at open discharge. Amp draws listed are at 12 volt. Amp draw at 13.6 volts (fully charged battery) will be higher than shown. Rule pumps are backed by Rule's 3 year limited warranty on bilge pumps 2 year warranty on float switches except for SuperSwitch which has 5 year warranty.

    Rule 1500 Bilge Pumps
    These high capacity, 12v or 24v heavy duty submersible bilge pumps have double insulated, dual water / air cooled motors manufactured by Rule, specifically for marine use. The pumps are ignition protected (will not create a spark) and won't burn out if run dry.
    Moisture tight wiring, anti-airlock feature, stainless steel shaft and Rule's exclusive Teflon seals combine to give total reliability and high performance. These pumps include a snap-on strainer base for easy cleaning and fitting, stainless steel mounting screws and a clip to secure a float switch to the pump.

    • 3 year limited warranty
    • Capacity : 1500 Gallons per hour - 94 Litres per min.
    • Pump Size : 152mm H x 108mm W.
    • Suits hose size 28mm (1 1/8")
    • 12 volt 4.8 amps

    Options: (see links below)

    specification

    Rule Pump Performance Chart
    This pump performance chart is an approximate guide to the output of various Rule pumps at various pumping heights. The left hand column shows the height in metres that the pump will push water to, and the bottom horizontal column shows output in US gallons per hour at the various pumping heights.
    Rule electric submersible bilge pumps will not lift water - they will only push it up. They must be submersed in the water. Output, water flow and pumping height will vary depending on battery and type of installation.