Muir Prices
Refrigeration
B-TECH LITHIUM PACKAGES
Hella Navigation Lights
Battery
Rule Pumps
Lonestar
ICOM
AV
Muir Winches
Smart TV
Hot Water Heaters
Plastimo Compass
Solar
Lighting
Pumps
Clarion
Jabsco Pumps
Topargee
TV
Battery Chargers
Electrical
Bennett
BBQ
B-Tec Lithium
Majestic
BBQ_2
Isotemp Hot Water System
Aus Wide Shipping

Johnson F3B-19 Impeller Pump - 12V - 21LPM - Heavy Duty - Self Priming - Bronze Body - 3/8" BSP - OIL TRANSFER with Reversing Switch - 10-24760-01 (132182)

  • Johnson SPX
    • Johnson F3B-19 Impeller Pump - 12V - 21LPM - Heavy Duty - Self Priming - Bronze Body - 3/8" BSP - OIL TRANSFER with Reversing Switch - 10-24760-01 (132182)

    Johnson F3B-19 Impeller Pump - 12V - 21LPM - Heavy Duty - Self Priming - Bronze Body - 3/8" BSP - OIL TRANSFER with Reversing Switch - 10-24760-01 (132182)

    Johnson F3B-19 Impeller Pump - Oil Change Pump with Integral Reversing Switch - Continuously Rated
    • Online Price: $487.00 (including 10 % GST tax)


    - OR -

    Australia's Best Price on Johnson F3B-19 Impeller Pump - 10-24760-01 (132182)

    Oil Change - Reversing Pump with Integral Switch

    12V - 21LPM - Heavy Duty - Self Priming - Bronze Body - 3/8" BSP

    overview

    Johnson F3B-19 Impeller Pump - 12V - 21LPM - 10-24760-01 (132182)

    Heavy Duty - Self Priming - Bronze Body - 3/8" BSP

    Oil Change Pump with Integral Reversing Switch

    Reversible rubber impeller pump with integrated quick reversing switch. Designed to remove old oil from the engine/fill new oil back into the engine.

    Features:

    • Body: Bronze
    • Impeller: 09-843S-9
    • Seal: Lip seal
    • Connection: 3/8" BSP
    • Length: 170mm
    • Width: 113mm
    • Height: 115mm
    • Weight: 2.1kg
    • Liquid temp.: Max +80°C
    • Motor: 0.12 kW, 12/24 V DC
    • The motor is ignition protected according to ISO 8846 (Small craft - Electrical devices - Protection against ignition of surrounding flammable gases).

    F3B-19 Oil Change:

    Locate the pump near the engine so the length of the hose to the engine can be kept as short as possible. To achieve best operation the pump should be installed at the same level as the maximum level of oil in the engine. Mount the provided ⅜” gate valve between the engine and the pump as a safeguard against accidental oil discharge during operation or draining. Use a reinforced oil hose that can withstand 120°C for connection between the pump and oil receptacle. Note! The hose between the motor and pump must use permanent connections.

    Operation: F3B19-Oil Change: Before changing the oil, run the engine and let the temperature rise to 50°C to reduce the viscosity. This makes it easier to handle the oil. Turn off the engine. Open the gate valve between the motor and pump. Make sure the discharge hose is securely positioned in a waste oil receptacle. Note that the discharge hose may tend to move slightly during operation. Move the switch in the flow direction to the receptacle. When the oil is drained (check with the dipstick of the engine) switch off the pump immediately by moving the integrated switch to its centre position. Change the oil receptacle to the container with new oil. Start the pump by pressing the switch in the flow direction to the motor. Use the dipstick of the engine to make sure the right amount of oil has been filled into the engine. Note! As soon as all oil has been drained from the engine, or when the container for refilling oil into the engine is empty, the pump must be stopped immediately. Otherwise there is a risk of dry running which will damage the impeller.

    Self-priming

    • Pump is self-priming up to 3 m (for F4B 4 m). Intake lines must be air-tight to ensure self priming.
    • Note: Pump will prime when impeller is dry but suction lift up to 3 m (for F4B 4 m) is only obtainable when impeller is lubricated with liquid being pumped or Johnson Impeller lubricant.
    • For permanent installations where suction lift exceeds 4 m, a foot valve should be used to assure priming on start up.

    Continuous duty

    • For continuous duty 0,6 bar (60 kPa) maximum head is permissible. Normal working temperature of the motor may reach approx. +80°C (surface temperature) which may burn your skin.
    • The motor is equipped with built in thermal protection to prevent the motor from overheating. The protection is automatically restored when the motor is cooled.

    specification