overview

Isotherm CR65 Inox Clean Touch Stainless Steel Fridge/Freezer 381705 (C065RNEIT11111AA)

12 or 24 Volt - 61L Fridge with 4L Freezer

Dimensions: 528 H x 470 W x 520 D (mm)

Changeable Left or Right Hand Door Hinge with 3-Side SS Flush Mounting Frame

Suitable for Boats-Caravans-Motorhomes and RVs

We ship Australia wide - Ask us for a quote!

Isotherm Cruise CR65 Inox Clean Touch Stainless Steel Refrigerator with an overall volume of 65 Litre with 4 Litre freezer. These 12 volt - 24 volt flush mounted cabinet style refrigerators with stainless steel doors & trims, are well suited for the marine environment, the latest development for the Inox Clean Touch is the new door design that has improved thicker insulation with the door in 304 grade stainless steel AISI specially treated to avoid fingerprints

The Isotherm CR65 features a freezer compartment with door and built-in compressor unit. It comes equipped with installation frame and interior light.

Features:

• Volume: 65L (Inc 4L Freezer)
• Reversible Door Hinge
• Food preparation compliant stainless steel case
• 3 sides Inox flush mounting frame standard
• The handle, flush mounted and centrally located, allows easy switch of the hinge opening side
• Silent, high efficient, fan cooled 12/24V Danfoss / Secop compressor (type BD35F)
• New evaporator / freezer: covers made by injection parts, evaporator doors in stainless steel
• Adjustable shelves
• Internal White LED light
• Low voltage cut off
• Radio interference suppression
• Internal rotary thermostat
• Utilises R134A ozone friendly refrigeration gas

Download:

• Dimensional Drawings 3D
• Isotherm Cruise Marine Refrigerator Brochure
• Isotherm Cruise & Elegance Manual
• Isotherm Cruise 65L Clean Touch Spare Parts List

specification

Ventilation:
It is very important that the compressor/condenser unit is well ventilated and that cold air can enter at the bottom, pass behind the fridge and warm air can leave at the top in the area where it is mounted. The natural flow of air from below and upwards behind the fridge can be increased by arranging  ventilation openings at the rear. Make sure there is a free area of 15 - 23 sq.in. below and behind the refrigerator to allow ventilation air to pass behind from below. (see diagram below).

Battery Voltage (Shut Down) Sensor:
To protect the batteries from becoming completely discharged, a battery voltage sensor switches off the compressor automatically at the following levels:

Electrical Connections:
When connecting the refrigerator electrically, it is important that following points are considered:
Always use cables of suffi cient area. The area in the following table should be regarded as a minimum. * Always connect the refrigerator directly to the battery or to the battery main switch on the plus circuit. Do not connect it via the boats own control panel or other diversions as this can cause a voltage drop in the power supply. Use the included fuse holder with a 15A fuse. Use 7.5A fuse in a 24 volt system. The fuse shall be mounted on the plus cable.
*Connect the red cable to the positive (+) terminal and the black to the negative (-) terminal. Use tab type terminals for the connection to the electronic unit and other cable connectors of sufficient size for the cable size selected. * Do not connect the refrigerator direct to a battery charger. The battery charger must be connected to the battery.

Wire Dimensions:
The correct wire gauge  and type must be used.