Muir Prices
Refrigeration
B-TECH LITHIUM PACKAGES
Hella Navigation Lights
Battery
Rule Pumps
Lonestar
ICOM
AV
Muir Winches
Smart TV
Hot Water Heaters
Plastimo Compass
Solar
Lighting
Pumps
Clarion
Jabsco Pumps
Topargee
TV
Battery Chargers
Electrical
Bennett
BBQ
B-Tec Lithium
Majestic
BBQ_2
Isotemp Hot Water System
Aus Wide Shipping

Solar 400Plus Solar Package incl. MPPT Solar Controller and DC2DC Charger - Charges Max 27A/hr @ 12V - Suits 12V Systems (ENE 400Plus)

  • Enerdrive
    • Solar 400Plus Solar Package incl. MPPT Solar Controller and DC2DC Charger - Charges Max 27A/hr @ 12V - Suits 12V Systems (ENE 400Plus)

    Solar 400Plus Solar Package incl. MPPT Solar Controller and DC2DC Charger - Charges Max 27A/hr @ 12V - Suits 12V Systems (ENE 400Plus)

    Solar 400Plus Solar Package incl. Solar Controller and 12 or 24VDC to 12VDC Charger - Two Inputs - Alternator and Solar
    • Online Price: $0.00 (including 10 % GST tax)


    - OR -

    Australia's Best Price on Solar Versatile - 400Plus Solar Package

    Incl. 2 x 200W Solar Panels + MPPT Solar Controller with DC to DC Charger - Charges Max 27A/hr @ 12V (ENE 400Plus)

    Panel size (1580 x 800mm) each - Charges 12VDC Systems

    Australia Wide Shipping To Most Areas in Queensland, Victoria, NT, South and Western Australia

    Suits Boats, Caravans, Motorhomes, Campers and RV's

    FREE Power while your FREE Camping!

    overview

    Solar 400W Solar Package (ENE400Plus)

    Incl. 2 x 200W Solar Panels + MPPT Solar Controller with DC to DC Charger

    Charges Max 27A/hr @ 12V

    Incl 2 x 200W Solar Panels (each 1580 x 800mm)

    (Incl. 2 x  SP-EN200W + EN3DC40+) Panel size (1580 x 800mm) each

    Solar Panels with warranty for mobile installations.

    Enerdrive solar panels are typically around 20+vdc open circuit and are well suited to 12v installations (or 24v by series connections of panels). The 200W panels have MC4 compatible solar cable connectors included.

    *NB: The SP-EN200W solar panels are suitable for charging 24V Battery System when using a PWM Controller. For Charging a 12V Battery System a MPPT Solar Controller MUST be used.

    With a mass of factories developing solar panels around the world, the biggest choice is ‘Where to buy” & even more importantly “What quality and support am I getting”. Staying with Enerdrive products throughout your entire solar system makes a single point contact for all things relating to solar products, warranty and importantly that same level of support that we have provided for many years with all Enerdrive products. If you buy from us you will ALWAYS be dealing with Enerdrive for warranty, and we won’t hide behind supplier warranty statements or clauses. Enerdrive’s volume will allow us to ensure that any quality or warranty issue can be dealt with LOCALLY.

    Enerdrive ePOWER DC2DC+ Battery Charger 40A

    ePower DC to DC battery charger is smaller than our most compact AC Battery Charger.

    • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
    • DC M6 screw terminals that will allow for large battery cable connection between all sources
    • A dedicated Maximum Power Point (MPPT) solar regulator
    • The same battery algorithms as included in our AC mains ePOWER battery charger. GEL, AGM, Flooded, Lithium and the ability to create  a full custom profile
    • Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
    • 40A output up to 40+°C with thermo controlled fan cooling
    • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
    • Temperature sensor included in charger for more accurate battery charging

    The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.

    During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads.

    Multistage Charging Process

    The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries.

    The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array.

    As dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages.

    Stage 1 – Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible.

    Stage 2 – Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge.

    Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply.

    Smart Charging Feature

    The ePOWER DC2DC+ Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The ePOWER DC2DC+ Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so.

    ePOWER Battery Charger Temperature Sensor

    Battery Temperature Sensor

    Included standard with all ePOWER Battery Chargers.

    specification

    200W Solar Panel Specifications (each)

    Max Power Pm(W) 200
    Power Tolerance % – 1% ∼ + 3%
    Max Power Voltage Vm(V) 37.26
    Max Power Current Im(A) 5.37
    Open Circuit Voltage Voc(V) 43.7
    Short Circuit Current Isc(A) 6.17
    Max System Voltage (VDC) 1000
    Dimensions (mm) 1580 x 800 x 40
    Weight (kg) 15.3
    Test Conditions 1000W/m² , AM1.5 , 25°C

    DC2DC+ Battery Charger Specifications

    Model EN3DC40+
    Output Rating
    Output Voltage 12V Nominal (8.0V min)
    Output Current (Maximum) 40A ~ 50A
    Output Power 775W
    Charger DC Output (CH1):
    Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
    Charger Voltage Range 13.8V – 15.5V
    Float Voltage Range 13.0V – 13.8V
    Charger Current (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
    Equalize Voltage (Flooded Battery) 15.5V
    Equalize Charging Current 10% of Bulk Current Setting
    Charging Control 2 stage / 3 stage selectable (Default 3 stage)
    DC Output Bank Single
    Current draw from CH1 when in use = < 50mA
    Battery Temperature Setting Low/ Normal/ High (Battery Temperature Sensor Standard)
    Efficiency 95%
    INPUT Rating (CH2 – MPPT Solar)
    Input Voltage 14.5 – 45VOC
    Maximum Input ≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)
    INPUT Rating (CH3 – Start/Alternator)
    Input Voltage 10.5 – 16VDC / 21 – 32VDC
    Note: Specifications subject to change without notice.