Phone: 07 5529 2544

  • Your enquiry is empty!

Muir Prices
AV
Lighting
B-TECH LITHIUM PACKAGES
Refrigeration
Rule Pumps
Hella Navigation Lights
Lonestar
Battery
ICOM
Smart TV
Pumps
Muir Winches
Hot Water Heaters
Plastimo Compass
BBQ_2
Isotemp Hot Water System
Solar
Battery Chargers
TV
Topargee
Electrical
Clarion
Jabsco Pumps
B-Tec Lithium
Bennett
BBQ
Majestic
Aus Wide Shipping

Bennett Hydraulic Trim Tab Kit - Complete M80 Sports Kit with Standard Euro Rocker Control Switch - 8 x 10 Inch Tabs - Suits Most Boats 5.2 - 5.8m - 12 Volt (499/M80)

  • Bennett Hydraulic Trim Tab Kit - Complete M80 Sports Kit with Standard Euro Rocker Control Switch - 8 x 10 Inch Tabs - Suits Most Boats 5.2 - 5.8m - 12 Volt (499/M80)

Bennett Hydraulic Trim Tab Kit - Complete M80 Sports Kit with Standard Euro Rocker Control Switch - 8 x 10 Inch Tabs - Suits Most Boats 5.2 - 5.8m - 12 Volt (499/M80)

Bennett M80 Sports Hydraulic Trim Tab Kit Complete with Standard Euro Rocker Control - Fits Narrow Transom

  • Online Price: $1,311.00 (including 10 % GST tax)


- OR -

Australia's Best Price on Bennett M80 Sports Hydraulic Trim Tab Kit (499/M80)

Complete with Standard Euro Rocker Control Switch

8 x 10 Inch Tabs - Suits Most Boats 5.2 - 5.8m - 12 Volt - Fits Narrow Transoms

 

overview

Bennett M80 Sports Hydraulic Trim Tab Kit (499/M80)

Complete Kit with Standard Euro Rocker Control Switch

8 x 10 Inch Tabs - 12 Volt - Fits Narrow Transom

Suits Most Boats 5.2 to 5.8 Meters (17-19 ft)

Benefits:
Bennett’s M80 and M120 Sport Tabs series are ideal for trailered boats in the 17' - 23' range. Their unique Batwing design provides 30% more lift than conventional trim tabs and their space-saving design ensures easy installation on virtually any transom.

Choosing the Right Trim Tabs for Your Boat -
Trim tab kits are available to suit  tinnies, rigid inflatables,  trailer boats, centre consoles, side consoles, runabouts, bass boats, most powerboats, fly bridge cruisers and large motor cruisers.
If you are not sure which is best for your boat read on and then call call Keoghs Marine  on 07 5529 2544 for advice and information.

Will Trim Tabs Keep my Boat Level?

Yes...you can improve the performance of your boat through properly sized trim tabs that will:

  • Get you up on plane quickly
  • Allow you to plane at speeds lower than designed planing speed
  • Adjust the boat’s attitude for changes in speed, sea conditions and shifting weight
  • Correct boat's side lean (listing) on either side of the boat
  • Less drag and engine laboring, which translate into increased performance, greater speed, and reduced fuel consumption
  • Reduced pounding, which means greater comfort
  • Greater visibility, which increases safety
  • Complete 12V Boxed Kit with Control switch
  • Hydraulic Rams - can be left in the water - ideal for trailer boats and moored boats
  • Trim Tab Sports Plane  - 8" x 10" -  will fit a narrower space on the transom but has more lift due to the fins
  • 5 Year Warranty

Can I install Bennett Trim Tabs Myself?
Absolutely! While some boat owners may wish to have a dealer or boatyard install their trim tabs, just about anyone who is handy with a drill and screwdriver can install trim tabs. Bennett Marine designs trim tabs so that the average do-it-yourself boater can handle the installation in an afternoon. Depending upon the size and construction of the boat, it should take about 4 or 5 hours for installation. (see pictures below in FAQs).

This Kit Includes:

  • 2 x Trim  Tab Planes Assemblies
  • 2 x Hydraulic Actuators/Rams
  • 1 x Hydraulic Power Unit -  which mounts inside the boat
  • 1 x Control unit (or combo) including wiring
  • 1 x Bag of Hardware Items
  • 20′ of Hydraulic Tubing

Downloads:

   

Why Have Trim Tabs?  As your boat slows from maximum speed, it begins to settle at the stern or “squat,” creating an inefficient, untrimmed condition. At this attitude you use more fuel to drive the boat. As the boat pushes forward, it creates a “hill of water.” In this bow-high position, visibility is limited and the hull bottom is pounded. Also because of significant hull drag and extreme prop angle, fuel economy is poor. Uneven weight distribution makes your boat harder to handle, even harder to get up on plane, and it causes your boat to list to one side. Your passengers complain when you tell them to move from one side to the other.

NB: This kit is available in two versions with different Control Switches - the Euro Standard Control switch or the Electronic Indicator Control (EIC) switch. The EIC also includes the Auto Trim Tab Retract, which automatically retracts the trim tabs when the ignition is turned off. Ideal for trailer boats, rack and stack boats being fork-lifted at the marina or when beaching in shallow water.

M80 Kits  
499/M80

KIT 8"x10" Sport Batwing Tabs + ES2000
(Euro Rocker Panel)
499/M80ATR KIT 8"x10" Sport Batwing Tabs + ES2000 + ATR
(Euro Rocker Panel with Auto Tab Retract)
499/M80/1EIC KIT 8"x10" Sport Batwing Tabs + EIC5000
(Extra Short Rams) (LED Indicator Control Panel with Auto Retract)
499/M80EIC KIT 8"x10" Sport Batwing Tabs + EIC5000 (Short Rams)
(LED Indicator Control Panel with Auto Retract)
499/M80ATP KIT 8"x10" Sport Batwing Tabs + ATP-HYD
(Auto Trim Pro Control Panel with 2 x Memories, Auto Trim and Auto Tab Retract)
499/M80/ACSRP KIT 8"x10" Sport Batwing Tabs + Mente Marine Attitude Control Panel
(LED Indicators, Auto Adaptive to Conditions and Roll-Pitch Control, Auto Trim and Auto Tab Retract)
M120 Kits  
499/M120 KIT 10"x12" Sport Batwing Tabs + ES2000
(Euro Rocker Panel)
499/M120ATR KIT 10"x12" Sport Batwing Tabs + ES2000 + ATR
(Euro Rocker Panel with Auto Tab Retract)
499/M120/1EIC KIT 10"x12" Sport Batwing Tabs + EIC5000 (Extra Short Rams)
(LED Indicator Control Panel with Auto Retract)
499/M120EIC

KIT 10"x12" Sport Batwing Tabs + EIC5000 (Short Rams)
(LED Indicator Control Panel with Auto Retract)
499/M120ATP KIT 10"x12" Sport Batwing Tabs + ATP-HYD
(Auto Trim Pro Control Panel with 2 x Memories, Auto Trim and Auto Tab Retract)
499/M120/ACSRP KIT 10"x12" Sport Batwing Tabs + Mente Marine Attitude Control Panel
(LED Indicators, Auto Adaptive to Conditions and Roll-Pitch Control, Auto Trim and Auto Tab Retract)

Other Options:

Other Trim Tab Kits:

See  Also Explaining the Different Types of Trim Tabs and How to Choose Between Electric or BOLT Trim Tabs or Hydraulic Trim Tabs? ......(scroll down to FAQs)

Trim Tabs for Larger Boats:

Bennett Classic Hydraulic Trim Tab Kits - Bennett Classic Hydraulic Trim Tab Kits - ideal for larger boats that stay in the water, requiring high speed action under extreme marine conditions - 12 Volt or 24 Volt available call us for more information.

Bennett Premier Line of XPT, BXT and SST systems - made for Motor Yachts, Military/Patrol and Sport Fishing vessels that face the most challenging conditions on the water.
The Premier Line of trim tabs are for Luxury Motor Yachts, Military, Government, Sport Fishing and Commercial vessels from 9 m (30 ft) to 38 m (120 ft).

  • XPT1520: 15″ x 20″ Trim Plane Assembly (Single actuator per tab)
  • XPT1820: 18″ x 20″ Trim Plane Assembly (Single actuator per tab)
  • XPT1824: 18″ x 24″ Trim Plane Assembly (Dual actuators per tab)
  • XPT Custom: (Custom sizes with single or dual actuator options)
  • BXT: (Custom sizes with single or dual actuator options)
  • SST: (Custom sizes with single or dual actuator options)
  • Single or dual stainless steel, dual acting actuators, no exposed hydraulic lines
  • Laser-cut 7-gauge, stainless steel, heavy duty trim planes
  • Systems can readily be retrofitted to any vessel
  • All systems are customizable
  • 12V or 24 V trim tab kits available

Call Keoghs Marine for further advice and information on 07 5529 2544.

 

 

FAQs Frequently Asked Questions

Can I install Bennett Trim Tabs Myself?

Absolutely! While some boat owners may wish to have a dealer or boatyard install their trim tabs, just about anyone who is handy with a drill and screwdriver can install trim tabs. Bennett Marine designs trim tabs so that the average do-it-yourself boater can handle the installation in an afternoon. Depending upon the size and construction of the boat, it should take about 4 or 5 hours for installation. (see pictures below in FAQs).

                

I can't get access to the inside of the transom to connect the hydraulic fittings. What do I do?
One of the unique features of the Bennett Trim Tab system is the use of concealed through-transom hydraulics. However, there are cases of complete inaccessibility inside the transom, making the use of the standard Bennett actuator difficult. For such instances, the Bennett actuator is available with an external line connection. This avoids the inaccessibility problem by allowing the hydraulics to enter the transom at a location where there is no obstruction. If you need external line actuators, please contact our sales staff for more information.

My Transom has a Swim Platform (or other feature) that limits the height where the actuators can mount on the transom. Now what?
There is an option for you – the “short” actuator. The short actuator’s overall closed length measures 11.75 inches so it can mount lower on the transom. It is 2 inches shorter than the standard actuator that measures 13.75 inches. If you need short actuators for your installation, contact Bennett Marine to arrange a no-charge exchange of your standard actuators.

What Size Fuse does my Trim Tab System use?
On a 12 volt Bennett system use a 20 amp (24 volt will use 10 amp) in-line fuse on the power lead to the helm control.

I Keep my Boat in Saltwater. Do I need to protect the trim tabs from corrosion?
To provide protection from electrolytic corrosion, a zinc anode must be applied to each tab. The zinc must make direct contact with the stainless steel. Do not ground trim tabs to other underwater appendages.

How do I Paint my Trim Tabs?
The secret to getting anti-fouling paint to adhere to your trim tabs is proper priming, and the best people to tell you what to do are the experts at the company that makes your anti-fouling paint. We strongly suggest that you contact the paint manufacturer and tell them you are painting “304 stainless steel” trim tabs, then follow their recommendations to the letter! Remember, don’t paint under the zincs.

How to Choose Between Electric BOLT Trim Tabs or Hydraulic Trim Tabs?
You’ve decided to install Trim Tabs on your boat and have begun researching which ones will be the best choice.
After you have made the choice of size (our website gives size recommendations for each tab kit) , you will need to choose between the Hydraulic Trim Tab Kits or the Bolt Electric Trim Tab Kits.
To help you decide let’s take a look at the features and benefits of both systems.

Explaining the Different Types of Trim Tabs

Electric Trim Tabs - BOLT Electric (Ram) Trim Tab Kits (For Non-Moored Boats Only)
Electric Trims Tabs such as BOLT (and other brands) are best suited for boats that are kept out of the water when not in use. A good rule of

specification

Boat Length Trim Tab Size (span x chord)
17’-19’ (5.2-5.8 m) 8” x 10” (20 x 25 cm) M80
19’-23’ (5.8-7 m) 10” x 12” (25 x 30 cm) M120
15'-19' (4.6-5.8 m) 12” x 9” (30 x 23 cm)
19’-24’ (5.8-7.3 m) 12” x 12” (30 x 30 cm)
20’-23’ (6.0-7.0 m) 18” x 9” (46 x 23 cm)
22’-27’ (6.7-8.3 m) 18” x 12” (46 x 30 cm)
22’-27’ (6.7-8.3 m) 24” x 9” (61 x 23 cm)
25’-31’ (7.6-9.1 m) 24” x 12” (61 x 30 cm)
25’-31’ (7.6-9.1 m) 30” x 9” (76 x 23 cm)
25’-31’ (7.6-9.1 m) 30” x 12” (76 x 30 cm)
32’-38’ (9.7-11.6 m) 36” x 9” (91 x 23 cm)
32’-38’ (9.7-11.6 m) 36” x 12” (91 x 30 cm)
36’-44’ (11.0-13.4 m) 42” x 9” (107 x 20 cm)
36’-44’ (11.0-13.4 m) 42” x 12” (107 x 30 cm)
42’-50’ (12.8-15.2 m) 54” x 9” (137 x 23 cm)

tpa_span_chord_small

Bennett Hydraulic Trim Kits Installation Tips

 Actuators (rams)  can be mounted as:- Standard Installation - where the upper hinge of the actuator is positioned against the transom or as a Vertical Installation  or as a Reverse Installation  which is popular for sport fishing  boats as the tabs won't get in the way of fishing lines.

Flexible Upper Actuator Hinge

Typical Installation