Bennett BOLT Electric Trim Tab Kit - Complete Kit with Bolt Control Indicator Switch and Auto Retract - 12 x 12 Inch Tabs - Suits Most Trailerboats 20'-25' - 12 Volt (499/BOLT1212ED/BCI8000)
Bennett BOLT Electric Trim Tab Kit - Complete Kit with Bolt Control Indicator Switch and Auto Retract - 12 x 12 Inch Tabs - Suits Most Trailerboats 20'-25' - 12 Volt (499/BOLT1212ED/BCI8000)
-
Online Price: $2,492.00 (including 10 % GST tax)
- OR -
Australia's Best Price on Bennett BOLT Electric Trim Tab Kit -Bennett BOLT Electric Trim Tab Kit
Complete Kit with Bolt Control Indicator Switch and Auto Tab Retract - 12 x 12 Inch Tabs
Suits Most Trailerboats - 12 Volt (499/BOLT1212ED/BCI8000)
overview
Bennett BOLT Electric Trim Tab Kit (499/BOLT1212ED/BCI8000)
Complete Kit with Bolt Indicator Control Switch & Auto Tab Retract
12 x 12 Inch Tabs - Suits Most Trailerboats - 12 Volt
Overview:
Bolt Electric Trims tabs are best suited for boats that are kept out of the water when not in use. A good rule of thumb is if your boat requires antifouling paint you should install a hydraulic system.
They are ideally suited to small craft such as flats boats, bass boats and bay boats. Open skiffs and other small boats are perfect candidates since there is no hydraulic pump to locate in the boat.
Electric motors in the actuators cannot be precisely synchronized so they are limited to one actuator per Trim Tab.
Benefits:
You can improve the performance of your boat through properly sized trim tabs that:
- Get you up on plane quickly
- Allow you to plane at speeds lower than designed planing speed
- Adjust the boat’s attitude for changes in speed, sea conditions and shifting weight
- Correct boat's side lean (listing) on either side of the boat
- Less drag and engine laboring, which translate into increased performance, greater speed, and reduced fuel consumption
- Reduced pounding, which means greater comfort
- Greater visibility, which increases safety
- Complete 12V Boxed Kit with Control switch
- 5 Year Warranty
- Installation is fast and simple without the need to assemble the actuator yourself
Kit Includes:
- 1 pair x 12-volt actuators with 6ft wire harnesses and waterproof connectors
- 1 pair x Stainless steel trim planes (tabs) and mounting plates
- 2 x 20ft. or custom length harnesses with waterproof connector
- 1 x Bolt Dash Indicator Control Switch (which shows trim tab positions)
- Auto Tab Retract
- Black Diagnostics Module
- 1 x Wiring harness to suit
Downloads:
- Bennett BOLT BCI8000 Installation Guide
- Bennett BOLT Wiring Diagram
- BOLT Installation and user Guide
Why Have Trim Tabs? As your boat slows from maximum speed, it begins to settle at the stern or “squat,” creating an inefficient, untrimmed condition. At this attitude you use more fuel to drive the boat. As the boat pushes forward, it creates a “hill of water.” In this bow-high position, visibility is limited and the hull bottom is pounded. Also because of significant hull drag and extreme prop angle, fuel economy is poor. Uneven weight distribution makes your boat harder to handle, even harder to get up on plane, and it causes your boat to list to one side. Your passengers complain when you tell them to move from one side to the other.
Note: The Bolt Trim Tab kits are available in two sizes 12 x 9 or 12 x 12 inch.
There is also a choice of three different Control Switches:- the Bolt Euro Standard Control switch (this has no trim tab position indicator and no auto retract), the Bolt Control Switch (non-indicator) with Auto Tab Retract, or the Bolt Indicator Control Switch with Auto Tab Retract. The Auto Trim Tab Retract feature automatically retracts the trim tabs when the ignition is turned off. Ideal for trailer boats, rack and stack boats being fork-lifted at the marina or when beaching in shallow water.
BOLT Electric Kits
| 499/BOLT912ED/BRC4000 | KIT 9"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + BRC4000 (BOLT Rocker Helm Control Panel) |
| 499/BOLT912ED/BCN6000 | KIT 9"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + BCN6000 (BOLT Standard Control Panel with Auto Tab Retract) |
| 499/BOLT912ED/BCI8000 |
KIT 9"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + BCI8000 |
| 499/BOLT912ED/ACSRP | KIT 9"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + ACSRP (Mente) (Mente Marine LED Indicators, Auto Adaptive to Conditions and Roll-Pitch Control, Auto Trim and Auto Tab Retract) |
| 499/BOLT912ED/ATPBC | KIT 9"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + ATP-Electric (Auto Trim Pro Control Panel with 2 x Memories, Auto Trim and Auto Tab Retract) |
| 499/BOLT129ADJ/BRC4000 | KIT 12"X9" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS+ BRC4000 (BOLT Rocker Helm Control Panel) |
| 499/BOLT129ADJ/BCN6000 | KIT 12"X9" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS+ BCN6000 (BOLT Standard Control Panel with Auto Tab Retract) |
| 499/BOLT129ADJ/BCI8000 | KIT 12"X9" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + BCI8000 (BOLT Electric Indicator Control Panel with LED Indicators) |
| 499/BOLT129ADJ/ACSRP | KIT 12"X9" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + ACSRP (Mente) (Mente Marine LED Indicators, Auto Adaptive to Conditions and Roll-Pitch Control, Auto Trim and Auto Tab Retract) |
| 499/BOLT129ADJ/ATPBC | KIT 12"X9" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + ATP-Electric (Auto Trim Pro Control Panel with 2 x Memories, Auto Trim and Auto Tab Retract) |
| 499/BOLT1212ED/BRC4000 | KIT 12"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + BRC4000 (BOLT Rocker Helm Control Panel) |
| 499/BOLT1212ED/BCN6000 | KIT 12"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + BCN6000 (BOLT Standard Control Panel with Auto Tab Retract) |
| 499/BOLT1212ED/BCI8000 | KIT 12"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + BCI8000 (BOLT Electric Indicator Control Panel with LED Indicators) |
| 499/BOLT1212ED/ACSRP | KIT 12"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + ACSRP (Mente) (Mente Marine LED Indicators, Auto Adaptive to Conditions and Roll-Pitch Control, Auto Trim and Auto Tab Retract) |
| 499/BOLT1212ED/ATPBC | KIT 12"X12" EDGE MOUNT, ADJUSTABLE UPPER HINGE ACTUATORS + ATP-Electric (Auto Trim Pro Control Panel with 2 x Memories, Auto Trim and Auto Tab Retract) |
Other Trim Tab Kits:
- Bennett Self Leveling Trim Tab Kits (Semi Fixed Rams) - For Small Tinnies and RIBs (no controls - Pair of tab planes with semi fixed 3 position screw down actuators)
- Bennett Hydraulic Sports Trim Tab Kit - M80 Suit Most Boats 5.2 - 5.8 meters (Trailer or Moored Boats)
- Bennett Hydraulic Sports Trim Tab Kit - M120 Suit Most Boats 5.8 - 7.5 meters (Trailer or Moored Boats)
- Bennett Classic Hydraulic Trim Tab Kits - ideal for larger boats that stay in the water, requiring high speed action under extreme marine conditions - call us for more information.
- Bennett Premier Line of XPT, BXT and SST systems - made for Motor Yachts, Military/Patrol and Sport Fishing vessels that face the most challenging conditions on the water.
How to Choose Between Bolt Trim Tabs or Hydraulic Trim Tabs?
You’ve decided to install Trim Tabs on your boat and have begun researching which ones will be the best choice.
After you have made the choice of size (our website gives size recommendations for each tab kit) , you will need to choose between the Hydraulic Trim Tab Kits or the Bolt Electric Trim Tab Kits.
To help you decide let’s take a look at the features and benefits of both systems.
- Bennett Hydraulic Trim Tab Systems:- have set the standard for durability for decades. Hydraulic systems are robust and will last for many years. With the electric pump safely mounted inside the boat in a dry location they are the best choice for boats kept in the water.
Since the nature of hydraulics permits precise synchronization of multiple actuators per Trim Tab, they are well suited for high speed and rough water applications.
The construction of the system also allows many components to be replaced if damaged, meaning the system can easily be repaired in the field at low cost by the boat owner.
It is true that hydraulic systems take more time to install than electric ones, but it is not difficult and easily within the skills of the average boat owner.
- Electric Trims Tabs Systems:- are best suited for boats that are kept out of the water when not in use. A good rule of thumb is if your boat requires antifouling paint you should install a hydraulic system.
They are ideally suited to small craft such as flats boats, bass boats and bay boats. Open skiffs and other small boats are perfect candidates since there is no hydraulic pump to locate in the boat.
Electric motors in the actuators cannot be precisely synchronized so they are limited to one actuator per Trim Tab.
Installation is a breeze you can start in the morning and be out running the boat before lunch. Their exclusive upper hinge design means no exposed wires and eliminates the need to reassemble them during installation.
Now that you have decided on the right system for your boat it’s time to consider which control and indicators you wish to choose.
specification
Bennett Electric Trim Kits Installation Tips
Typical Installation