overview

Vetus Flexible Drinking Water Tank 70 Litre

Square Shape - 780mm x  780mm  (TANKW70)

Vetus flexible water tanks can be installed quickly and will assume the shape of their surroundings. Supplied with a 42mm hole cut ready for the supplied 16mm drawing nipple. The loose included 38mm filling nipple requires a hole to be user cut in the desired position. Additional nipples can be supplied as an option.

Features fully welded the seams, with additional welded reinforcing strip. This makes the VETUS flexible tank resistant against much higher pressures, especially if the contents are moving when the boat is rolling or pitching.

Features:
The fabric of VETUS flexible water tanks consists of three layers:

1. a wear resistant layer
2. a reinforcement layer
3. a taste-free layer

Options:

• TANKW55 - 55L Rectangular Flexible Drinking Water Tank
• TANKW70 - 70L Square Flexible Drinking Water Tank
• TANKW100 - 100L Rectangular Flexible Drinking Water Tank
• TANKW160 - 160L Rectangular Flexible Drinking Water Tank
• TANKW220 - 220L Rectangular Flexible Drinking Water Tank
• TANKW1003 - 100L Triangular Flexible Drinking Water Tank

Accessories:

• Angled Fittings - Angled synthetic fittings suitable for Flexible tanks (fresh water and waste) - Incl. Backing Plate
  • FT13B - Hose connection, Ø 13 mm, right angle, for flexible tanks
  • FT16B - Hose connection, Ø 16 mm, right angle, for flexible tanks
  • FT19B - Hose connection, Ø 19 mm, right angle, for flexible tanks
  • FT25B - Hose connection, Ø 25 mm, right angle, for flexible tanks
  • FT38B - Hose connection, Ø 38 mm, right angle, for flexible tanks

specification

All Tanks are approximately between 240mm to 270mm high when filled.