overview

Reelax Centre Rigger Shotgun Rigging Kit (Single) (RX67004)

Kit of Components to Rig Single Centre Rigger Pole

This is a complete kit for a pair of outriggers, as distinct from the shot gun which is set up for just one pole.
Here, best quality, low maintenance fittings are provided, with ample (black) monofilament line for the largest (6.5 meter) halyard.
The kit includes complete instructions.
A pair of outriggers can usually be set up in a couple of hours.
The only tools required include a small electric drill, a small swaging tool and a shifting spanner.

Includes:

• 4 x Eye bolts
• 2 x D – Shackles, 2 x eye bolts and 2 x Stainless Pulleys 
• 2 x Blacks Release Clip
• 4 x Rosco 851-4/0 USA Black Coast Lock Snap Swivels
• 2 x Reelax Snubbers consisting of heavy duty 8.00mm shock chord which is doubled over with a stainless hook and stainless pulley fitted to each
• 6 x Nickel brass double sleeved crimps
• 4 x deck saddles
• 2 x 20 metres of solid 2.00mm monofilament line which has a black pigmentation for U.V protection and stability.

Options:

• Reelax Plastic Rigging Kit (7.1) - Kit consists of all the components to rig 1 pair of outrigger poles.
• Reelax Stainless Rigging Kit (7.2) - Kit consists of all the components to rig 1 pair of outrigger poles.
• Reelax Super Rigging Kit (7.4) - Kit consists of all the components to rig 1 pair of outrigger poles -  Includes a Tag Line Kit for 2 poles.
• Reelax Tag Line Rigging Kit (7.3) - Eliminates Slack Line - use with 7.1 or 7.2 kit
• RX70005 Reelax Outrigger Rigging Kit Spare Cork Balls (each) 7.E
• RX70006 Reelax Outrigger Rigging Kit Spare Eye Bolt Kit 7.F Reelax Outrigger Rigging Kit Spare Eye Bolt Kit 7.F. Kit includes: 6x Eye Nuts, 2x Pully, 2x Shackles.
• RX70002 Reelax Outrigger Rigging Kit Spare Snubber / Shock Cord 7.B Outrigger halyard line tensioner (snubber) with stainless steel clip & single roller. For setting up outriggers to maintain tension.
• RX70003 Reelax Outrigger Rigging Kit Spare Stainless Steel Tagline Weight 150g (Pair) 7.C Essential for effective tagline setup. 316 stainless steel weight for marine environment durability & rubber bumpers to prevent damage to your boat and gear. Sold as a pair
• RX70001 Reelax Outrigger Release Clip 7.A (each)
• RX70004 Reelax Outrigger Rigging Kit Spare Black Mono 2mm / 20m Roll 7.D
• RX70022 Reelax Outrigger Pole Spare End Cap (each) 7.0B Sold individually.

Downloads:

• Explaining Tag Lines - How to Increase Your Hook Up Ratio (PDF)

specification

Typical Outrigger Pole Rigging Example

Rigging Kits Sold Separately
(Note - Contents of the kits vary depending on kit choice)

Rigging Tips:

• Rig your poles before they are fitted to your stainless steel brackets
• Tie a knot behind each crimp to stop the mono from slipping during setup
• Crimp it off when you are satisfied with the setup
• You will often have a running and a trolling position for the shockcords
• Eyebolts should be finger tight only and thread locker such as Loctite should be use