overview

Reelax Deluxe Shot Gun Centre Rigger/Shotgun Base 6.7a (RX67001)

Adjustable to 8 Positions (Vertical to Horizontal)

Suits 3 Metre Shotgun Pole - Sold Each

The Reelax Deluxe Centre Rigger is adjustable to 8 different positions from vertical to horizontal (11.25 degree increments). The unit folds up and down to allow pole to lay flat or stand up. ideal for running a fifth line in the centre of the boat out past the riggers. Mainly used for light to medium trolling. Mounting feet to be approximately 150mm apart when fitted. Designed to suit 3m centre rigger / shotgun poles. Constructed of 316 stainless steel, electropolished, then mirror polished.

Features:

• The index adjustment allows pole angles from vertical to horizontal with increments of 11.25 degrees (8 adjustments).
• The index adjustment is supported by a rear plate that is an integral part of the casting and takes the load of side to side movement from the pole.
• The boss fitting that straddles the index plate has reinforced support ribs as an integral part of the casting also to take the loads of side to side movement from the outrigger pole.
• Reelax Deluxe Shot Gun comes with 5/16 diameter - 316 stainless ball locking pin and are available separate on request. 
• To keep the Reelax Deluxe Shot Gun securely connected to its mounting point it comes fitted with stainless safety halyards with cast spring hooks and deck eyes.
• Simple to install 80mm diameter mounting plate x 4 bolt holes.
• All castings and tube (44mm x 1.6mm) are mirror polished 316 stainless.
• Tube diameter of 44mm O.D & 40.8mm I.D (inside diameter) .
• Maximum pole length to be fitted is 3 meter with a tube diameter of 40.8mm I.D (inside diameter).

Options:

• 3 metre Shot Gun/Centrerigger Fibreglass Pole (Part no. 6.7c)
• Centre Rigging Kit (6.7d)
• Centre Rigger Spear Tip (6.7b)
• KIT – Deluxe Centre Rigger with 3.0m Fibreglass Pole, inc Rig Kit and Spear Tips – RX79950
• KIT – Deluxe Centre Rigger with 3.0m 3K Carbon Fibre Pole, inc Rig Kit and Spear Tips – RX79970

specification

All castings and tube (44mm x 1.6mm) are mirror polished 316 stainless

Tube diameter of 44mm O.D & 40.8mm I.D (inside diameter)

Maximum pole length to be fitted is 3 meter with a tube diameter of 40.8mm I.D (inside diameter)