overview

Reelax Stainless Rigging Kit - Suits Telescopic Poles (RX77000)

Kit of Components to Rig 1 Pair of Outrigger Poles

This is a complete kit for a pair of Telescopic outrigger poles.

Here, best quality, low maintenance fittings are provided, with ample (black) monofilament line for the halyard.

The kit includes complete instructions. A pair of outriggers can usually be set up in a couple of hours. The only tools required include a small electric drill, a small swaging tool and a shifting spanner.

Options:

• Reelax Plastic Rigging Kit (7.1) - Kit consists of all the components to rig 1 pair of outrigger poles.
• Reelax Telescopic Stainless Rigging Kit – Kit consists of all the components to rig 1 pair of Telescopic outrigger poles.
• Reelax Stainless Rigging Kit (7.2) - Kit consists of all the components to rig 1 pair of outrigger poles.
• Reelax Super Rigging Kit (7.4) - Kit consists of all the components to rig 1 pair of outrigger poles -  Includes a Tag Line Kit for 2 poles.
• Reelax Tag Line Rigging Kit (7.3) - Eliminates Slack Line - use with 7.1 or 7.2 kit
• RX70005 Reelax Outrigger Rigging Kit Spare Cork Balls (each) 7.E
• RX70006 Reelax Outrigger Rigging Kit Spare Eye Bolt Kit 7.F Reelax Outrigger Rigging Kit Spare Eye Bolt Kit 7.F. Kit includes: 6x Eye Nuts, 2x Pully, 2x Shackles.
• RX70002 Reelax Outrigger Rigging Kit Spare Snubber / Shock Cord 7.B Outrigger halyard line tensioner (snubber) with stainless steel clip & single roller. For setting up outriggers to maintain tension.
• RX70003 Reelax Outrigger Rigging Kit Spare Stainless Steel Tagline Weight 150g (Pair) 7.C Essential for effective tagline setup. 316 stainless steel weight for marine environment durability & rubber bumpers to prevent damage to your boat and gear. Sold as a pair
• RX70001 Reelax Outrigger Release Clip 7.A (each)
• RX70004 Reelax Outrigger Rigging Kit Spare Black Mono 2mm / 20m Roll 7.D
• RX70022 Reelax Outrigger Pole Spare End Cap (each) 7.0B Sold individually.

Downloads:

• Explaining Tag Lines - How to Increase Your Hook Up Ratio (PDF)

specification

Typical Outrigger Pole Rigging Example

Rigging Kits Sold Separately
(Note - Contents of the kits vary depending on kit choice)

Rigging Tips:

• Rig your poles before they are fitted to your stainless steel brackets
• Tie a knot behind each crimp to stop the mono from slipping during setup
• Crimp it off when you are satisfied with the setup
• You will often have a running and a trolling position for the shockcords
• Eyebolts should be finger tight only and thread locker such as Loctite should be use