Solar
Hot Water Heaters
Lighting
Refrigeration
Battery
Pumps
AV
Lonestar
Topargee
Clarion
Battery Chargers
TV
Bennett
Travelmate
BBQ
Majestic
Electrical
BBQ_2
Evakool
B-Tec Lithium
FREE DC2DC OFFER
B-TECH LITHIUM PACKAGES
Evakool Travelmate
Isotemp Hot Water System
Open for Business
Aus Wide Shipping

Isotherm Danfoss BD50F Air Cooled 12V-24V Compressor ONLY- Danfoss Electronic module is NOT INCLUDED (381834) SBC39325DA

  • Isotherm
    • Isotherm Danfoss BD50F Air Cooled 12V-24V Compressor ONLY- Danfoss Electronic module is NOT INCLUDED (381834) SBC39325DA

    Isotherm Danfoss BD50F Air Cooled 12V-24V Compressor ONLY- Danfoss Electronic module is NOT INCLUDED (381834) SBC39325DA

    Isotherm Danfoss BD50F 12/24V Air Cooled Compressor ONLY Danfoss Electronic module is NOT INCLUDED SBC39325DA
    • Online Price: $1,153.00 (including 10 % GST tax)


    - OR -

    Australia's Best Price on Isotherm Danfoss BD50F 12/24V Air Cooled Compressor SBC39325DA
    Danfoss Electronic module is NOT INCLUDED

    overview

    Isotherm Danfoss BD50F 12/24V Air Cooled Compressor

    Danfoss compressor complete with condenser, tubing and quick connect couplings supplied as a replacement part for Isotherm refrigeration units. The SBC39325DA compressor includes a fan. Although they are factory pre-gassed, the complete system must be evacuated and re-charged with ozone friendly R134A refrigerant upon replacement.

    The BD50F is next in line to the BD80F compressor.  Like the smaller BD35F (below) and larger BD80F (above), the BD50F uses an electronically communicated permanent magnet brush-less DC motor.  The advantages of this approach are small size and variable-capacity.  As with its predecessors, the BD50F does require the use of an electronic power module.  Like all electronics, the power module is extremely reliable as long as it is properly installed and does not overheat.  (To prevent overheating use our Danfoss Power Module Cooling Fan Kit.) 

    NOTE:  The BD50F compressor requires a Power Module to run.  The same power module is used for 12vdc and 24vdc systems.  The module must be purchased separately from the compressor.  There are three types of modules to choose from, the standard power module (010-1175), the Adaptive Energy Optimizing (AEO) module (010-1176), or the High Start module (010-1178).  The AEO module is more energy efficient as the compressor will always adapt its speed to the actual cooling demand.  The High Start module provides additional starting torque  and is more dependable in turning the system on. 

    Options:

    • Danfoss Electronic module is NOT INCLUDED
    • SEG00002DA - 12/24 Volt Electronic Control Unit - suits BD35F and BD50F

    Downloads: