EcoFlow Wave 2
Zero Breeze
B-TECH LITHIUM PACKAGES
Hella Navigation Lights
AV
ICOM
Lonestar
Rule Pumps
Smart TV
Muir Winches
Plastimo Compass
Hot Water Heaters
Solar
Refrigeration
Lighting
Battery
Pumps
Clarion
Jabsco Pumps
Topargee
Battery Chargers
TV
Bennett
BBQ
Electrical
Majestic
BBQ_2
B-Tec Lithium
Isotemp Hot Water System
Aus Wide Shipping

Isotherm Replacement DC Electronic Control Module for all Danfoss BD35 and BD50 Compressor's - 101N0212 - 381840 SEG00002DA - 101N0219R (Eva Comp-Mod-Seacop)

  • Isotherm
    • Isotherm Replacement DC Electronic Control Module for all Danfoss BD35 and BD50 Compressor's - 101N0212 - 381840 SEG00002DA - 101N0219R  (Eva Comp-Mod-Seacop)

    Isotherm Replacement DC Electronic Control Module for all Danfoss BD35 and BD50 Compressor's - 101N0212 - 381840 SEG00002DA - 101N0219R (Eva Comp-Mod-Seacop)

    New Model 101N0219R Isotherm Replacement Isotherm DC Electronic Module for all Danfoss / Seacop BD35 and BD50 Compressor's
    • Online Price: $392.00 (including 10 % GST tax)


    - OR -

    Australia's Best Price on the Isotherm DC Electronic Module for all Danfoss BD35 and BD50 Compressor's

    We deliver Australia wide - Ask us for a quote!!

    overview

    Isotherm Replacement DC Electronic Control Unit

    * New Model 101N0219R Replacement For The 101N0212 & 101N0210 *

    We deliver Australia wide - Ask us for a quote!!

    12 - 24 Volt Electronic Module for all Danfoss BD35 and BD50 Compressors, used on Isotherm Refrigeration since 1998. Connects to the compressor with three pins.

    Tech Tip: To test this module, put a jumper between the T (Thermostat) and C (Compressor) terminals. The compressor should start and run at low speed. If the compressor doesn't start, you may need to replace this module.

     New Danfoss/ Seacop part number #101N0219 - Replacement for SECOP / Danfoss 101N0210 & 101N0212

    Download:

    Image of SECOP Replacement Module

    specification

    • Danfoss part number #101N0219
    • Replaces part number # 101N0212
    • Replaces part number # 101N0210
    • Case size: 2 5/8" x 4 1/8" x 1 3/4
    • The electronic unit is a dual voltage device. This means that the same unit can be used in both 12V and 24V power supply systems. Maximum voltage is 17V for a 12V system and 31.5V for a 24V power supply system. Max. ambient temperature is 55°C. The electronic unit has a built in thermal protection which is actuated and stops compressor operation if the electronic unit temperature gets too high.