overview

Rule LoPro 900S Submersible Bilge Pump - Manual (RWB5159)

12 Volt - 4 Amp - 57LPM - Horizontal  or Vertical Mount

Incl. 20, 25 and 28mm Straight Hose Tails and 20mm 90° Tail

We ship Australia wide - ask us for a quote!

Rule LoPro Series Bilge Pumps are designed to bring pumping power to tight spaces. Multiple modes of operation provide flexibility for a variety of applications.

Rule’s LoPro Series Bilge Pumps are only 2.25” high. The 900S model features two automated modes. The first one engages the pump when the water level reaches 2” or 1.3” (user choice); and the second one checks for water by briefly turning on the pump every 2.5 minutes. The 900D model requires a float and/or panel switch.

• Multiple modes of operation. The 900S features two automated modes of operation.
• High or low water sensing mode. The pump starts when water reaches a 2” level. By turning the motor cartridge upside down, the sensor is at 1.3”
• Electronic automatic mode. The pump automatically turns on every 2.5 minutes to check for water, and if it’s detected the pump stays on until the water is gone.
• Fully rotating discharge body. The entire body swivels up to 180°, making the pump extremely easy to install.
• Threaded discharge nozzle. Multiple ports are available for this pump.
• ¾” straight, ¾” right angle; 1”, 1-1/8”
• All ports are included in the aftermarket package
• Backflow prevention. New tricuspid check valves help prevent backflow.
• Horizontal or vertical mounting. The 900D features a variety of mounting options to accommodate the boat’s design.

Model No.: LP900

• Choice of operational mode (LP900S Automatic model only)
• Fully rotating discharge body
• Choice of discharge ports supplied with each pump
• Backflow prevention valve
• Horizontal or vertical mounting
• Automatic model
• LP900S - Dimensions (L x W x H) 9.35 x 2.3 x 2.3 (inches) 237.5 x 584 x 584 (mm)
   

  

  

Options: (see links below)

• RWB5159 - LP900S - The 900S model features two automated modes. The first one engages the pump when the water level reaches 2” or 1.3” (user choice); and the second one checks for water by briefly turning on the pump every 2.5 minutes
• RWB5158 - LP900D - The 900D model requires a float and/or panel switch.
• Pump Filters
• Hose Fittings and Connectors
• Control Switches and Float Switches
• Strainers and Strum Boxes
• Valves
• Skin Fittings
• Vented Loops
• Accumulator Tanks
• Deckwash Accessories
• Pumps

specification